April 2015 Vehicular Gate Operators
Model 6300
Automatic Limit Swing Gate Operators
Designed to operate large vehicular swing gates in residential, commercial and industrial applications. These operators
can be installed on mounting posts or directly onto a concrete mounting-pad – select mounting kit when ordering.
Secondary operators are used in bi-parting (dual) gate applications and cannot be used as a stand-alone device.
Step 1: Choose an Operator or Operator Set
6300-080 1/2 HP, 115V (5.4A) Primary
6300-081 1/2 HP, Secondary
6300-082 1/2 HP, 115V (5.4A) Primary w/C.O.
6300-083 1/2 HP, Secondary w/C.O.
• Secondary includes 50-ft interconnection cable
• C.O. = Convenience Open (gate opens upon AC power
loss)
6300-084 1 HP, 115V (9.7A) Primary
6300-085 1 HP, Secondary
6300-086 1 HP, 115V (9.7A) Primary w/C.O
6300-087 1 HP, Secondary w/C.O.
• Secondary includes 50-ft interconnection cable
• C.O. = Convenience Open (gate opens upon AC power
loss)
Step 2: Choose a Mounting Kit(s)
2600-264 Pad Mount, Arms and Hardware Kit
2600-263 Post Mount, Arms and Hardware Kit
High Voltage Kit
2600-266 High Voltage Kit
• Allows the operator to be powered from 208, 230, 460
or 575 source voltage. In dual gate applications, only
one (1) kit is required (secondary operator DOES NOT
require a high voltage kit).
Accessories
Entrapment prevention devices (required) .....................Pg 20
Loops and loop detectors................................................Pg 21
Backup power inverters ..................................................Pg 26
1601-154 Heater Kit 115 VAC
1601-197 Heater Kit 208/230 VAC
1601-198 Heater Kit 460 VAC
6500-490 Uphill Arm Pivot Assembly
• Use with 1203-084 Torsion Rod Assembly (Pg 10)
Swing gate accessories .............................................. Pg 10-11
Gate operator accessories ........................................ Pg 22-24
Model 6300 Maximum Capacities
Specifications subject to change without notice. Section A1, Page 7
Comments to this Manuals