DKS 1601 Installation Guide download pdf (Page 22)

1601-065-M-05-07

installation guide 23

arm installation/wishbone

/&&

Install the inside/outside counterweight plates on the barrier

arms using the supplied hardware.

Install the two (2) barrier arm mounting brackets onto the

hubs as shown, do not tighten the bolts at this time. Refer to

page 22 for more information.

Slide the 14’ft. barrier arm through the mounting brackets.

The arms must extend at least 14” inches behind the arm

hubs allowing the counter balance plates to be installed.

Tighten and secure the 14’ ft. arm to the

arm hubs.

Install the 10’ ft. barrier arm between the two 14’ ft. arms us-

ing the supplied hardware.

Check for correct shaft rotation.

Refer to page 21 when installing the hubs.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

No comments

DKS 1601 Installation Guide Page 22