DKS 1601 Installation Guide download pdf (Page 29)

1601-065-M-05-07

30 installation guide

accessory installation/fan kit

3&"37*&8

An optional fan kit is recommended in hot humid climates to prevent moisture build-up inside the cabinet.

SWITCH SETTING

OFF - Turns the fan off.

ON - Turns the fan on continuously.

AUTO - Normal setting. The fan will

automatically turn on when the

temperature inside the cabinet rises

above 90°F, and will turn off when

the temperature drops below 90°F.

Install the fan on the lower right side of the cabinet and duct using the pre-existing

mounting screws.

Route the wiring through the side of the access door as shown. Use the supplied hardware to secure the

wire assembly. Be sure that the wire assembly is clear of all moving parts.

Turn the operator power OFF at the circuit breaker panel; all connections will be made to

the high voltage terminal strip.

Connect the BLACK wire to the 117 VAC terminal on the high voltage terminal block. Connect the

WHITE wire to the NEUT terminal.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

DKS 1601 Installation Guide Page 29