DKS 1601 Installation Guide download pdf (Page 26)

1601-065-M-05-07

installation guide 27

The ERD (electronic reversing device) in

the operator is not intended to replace

external reversing devices such as loops,

photo electric eyes, or reversing edges. It

is important that these devices be in-

stalled according to the needs and re-

quirements of your particular application.

settings/reverse sensitivity

Reverse sensitivity adjustment will cause the barrier arm to reverse direction of travel should an object be encountered during the down

cycle. The amount of force required for the arm to reverse direction depends on the reverse sensitivity potentiometer.

POWER

OFF

AUTO

DOWN

POWER

OFF

AUTO

DOWN

Set the AC power switch to the ON

position.

Set the control switch to the UP

position, the arm should rotate UP.

Set control switch to the DOWN position,

the arm will rotate down. CAUTION: Keep

pedestrians and vehicles clear of the arm

zone!

While the arm is traveling down, rotate the

reverse potentiometer clockwise until the

reverse LED illuminates, the arm will reverse

travel at this time.

Rotate the reverse potentiometer coun-

ter clockwise 1/8

Repeat the adjustment as needed to

find a satisfactory setting.

1 2

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

No comments

DKS 1601 Installation Guide Page 26