DKS 1601 Installation Guide download pdf (Page 35)

1601-065-M-05-07

36 installation guide

technical information/accessories

The following accessories are available for 1601 operators.

Loop Detector/plug directly into ports on circuit board simplifying wiring.

P/N 9406-010 - Single channel detector.

P/N 9405-010 - Two channel detector.

Loop Wire/with XLPE insulation is available in 500 and 1000 foot rolls, available in Black, Blue and Red insulation.

Loop Sealant

P/N 2600-771 Asphalt

P/N 2600-772 Concrete

Meg Ohm Meter/checks the integrity of ground loops.

P/N 9401-045

Reverse Edge/installs on the bottom of the wood arm.

P/N 8080-016

Photo Cell/prevents arm from lowering on vehicles or pedestrians.

P/N 8080-018

Time Clock/7 and 365 day clocks, used to automatically open gate at pre-set time, fits inside operator.

P/N 2600-791 7 day clock

P/N 2600-795 365 day clock

Surge Devices/helps prevent circuit board failure caused by lightning strikes and power surges.

P/N 1876-010 - High Voltage

P/N 1878-010 - Low Voltage

Replacement Batteries/back-up system.

P/N 1801-009

Speed Bumps/prefabricated 6-foot speed bump reduces traffic speed through gate system.

P/N 1610-150

Heater Kit/thermostatically controlled heater for cold weather areas.

P/N 1601-092

Fan Kit/thermostatically controlled fan for hot humid environments.

P/N 1601-093

Gate Tracker™/optional control board allows the barrier gate operator to report activity to a

companion 1833, 1835, 1837 or 1838 access control system.

Wood Arm/14-foot replacement wood arm.

P/N 1601-048

Aluminum Arm/14-foot replacement aluminum arm.

P/N 1601-216

Arm Padding/foam padding for the aluminum or wood arm.

P/N 1601-211

Shaft Spacer/used when attaching additional spike assemblies.

P/N 1601-069

1 2 ... 30 31 32 33 34 35 36

No comments

DKS 1601 Installation Guide Page 35